Posts

Ribbon or Rag Tie Flip Flops

DIY Rag Tie Flip Flops

Print Friendly, PDF & Email

Ribbon or Rag Tie Flip Flops

DIY Easy Rag or Ribbon Tie Decorate Your Own Flip Flops

This fun, quick, inexpensive way to decorate your feet is so creative, yet easy with a little bit of fabric torn into strips OR some ribbon!

It’s a great camp craft, teen activity, girls day project to have for days at the pool, or to make to match your summer outfits, or just because you want to have an excuse to dress up your feet!!!




DIY Funky Flip Flops

Supplies:

• A pair of plain flip flops

• Fabric of your choice  OR 1″ wide ribbon would work just as well, cut into 6″ lengths

• Pinking Shears

• RulerFunky Flip Flops 1


Directions: First you will want to cut strips of fabric into 1 inch wide and 6 inches long.

The strips do not need to be exact.Funky Flip Flops 2Don’t worry if you don’t have pinking shears you can use a pair of regular scissors as well.

When cutting the fabric, use about 25-30 strips of fabric per flip flop (depending on the shoe size.)

Next you will want to tie the fabric around the flip flop straps.Funky Flip Flops 3When tying the fabric around the flip flop, tye it into one knot. Funky Flip Flops 4If you are going to use more than one type of material start alternating at this point.

You may notice your strands starting to fray. This is what adds charm!  Funky Flip Flops 5


Tie all the way down until there is about 2 inches of the flip flop strap showing.

You want to stop here, for comfort when wearing:)
Funky Flip Flops 6

Trim the edges to your preferred length.

Now you can make several, varying the color of the flip flop and fabric or ribbon!

Print Friendly, PDF & Email
Copyright Carrie Groneman, A Mother’s Shadow, 2014, 2017

Recognize a blessing and be a blessing today




Soda Tab Jewelry

Soda Pop Tab Jewelry & Crafts

Print Friendly, PDF & Email

Soda Tab Jewelry

Soda Pop Tab Jewelry


Recycle and Re-Purpose!    What a GREAT craft project.  We asked neighbors to collect their pop tabs to show you how to make necklaces, headbands, key chains, bracelets – the sky’s the limit to what you can create!    
You can use ribbon of your choice; a terrific way to use up those extra pieces. These are for guys and gals alike. My daughter Delsi was so kind to learn to do this just for YOU.  So grab some pop tabs, ribbon and accessorize, make these up for gifts, girls night out, or anything your heart desires. 



Soda Pop Tab Jewelry
Supplies for Bracelet, Necklace or Headband: Soda pop tabs, approximately 20+ depending on your project
Ribbon, 1/4″ – 1/2″.    3 times the circumference of your wrist  

Directions:Soda Tab Jewelry 1This is the pattern of the soda can tops to make the jewelry.Soda Tab Jewelry 2Start by weaving the ribbons through the soda tabs, leaving about 4″ – 8″ inches at one end for tying.Soda Tab Jewelry 3


Lay another tap ON TOP of the one with the ribbon woven throughSoda Tab Jewelry 4Weave ribbon through both tabsSoda Tab Jewelry 5It will look like thisSoda Tab Jewelry 6


Soda Tab Jewelry 7The next tab will be placed UNDERNEATH the previous tab

Here is another view as you continue weavingSoda Tab Jewelry 8Side view of the weavingSoda Tab Jewelry 9Remember you alternate the tabs ON TOP to weave the ribbon, then UNDERNEATH the previous tab to weave the ribbon.Soda Tab Jewelry 10Pull through the back side as shown here.Soda Tab Jewelry 11


When you reach the desired length, go through the ends of the soda tab without adding another soda can top.Soda Tab Jewelry 12
 
To finish tie the ribbon ends in a knot to secure.
To wear, tie the ribbons in a loose knot or bow.Soda Tab Jewelry 13
For the key chain at the beginning, leave room for a loop, tie a knot and continue as directed above.Soda Tab Jewelry 14
 
Thank you Delsi for doing this tutorial for us!
Copyright Carrie Groneman, A Mother’s Shadow, 2014
Recognize a blessing and be a blessing today.